Diamond drilling machines: Accessories

Optional stainless 3-jaw keyed chuck

Small dust suction plate for dry core diameters 28mm to 92mm. Simple, yet highly effective low cost solution providing 100% dust free efficiency drilling when used in conjunction with our PV25 dust extractor or any other good extraction unit. Because the dust is drawn at source this product is far more effective than the more costly dust swivel accessories that fit to the machine chuck. In addition, because the dust is drawn at source it is acceptable to use either slotted or unslotted dry cores.

Large dust suction plate for dry core diameters 102mm to 162mm. Simple, yet highly effective low cost solution providing 100% dust free efficiency drilling when used in conjunction with our PV25 dust extractor or any other good extraction unit. Because the dust is drawn at source this product is far more effective than the more costly dust swivel accessories that fit to the machine chuck. In addition, because the dust is drawn at source it is acceptable to use either slotted or unslotted dry cores.

This drill rig stand accepts our PD162 diamond drill and enables you to connect 1/2" BSP (male) wet diamond cores and drill reinforced concrete up to 82mm diameter.

1/2" BSP (female) x 1/2" x 20 UNF (female) Water swivel that connects directly to the spindle of the PD162 diamond drill when using wet diamond cores.

15 Litre Pressurized water tank complete with hose and fittings. Can be used for hand held wet drilling or dust suppression for a disc cutter.

M12 Fast bolt with speed nut. Used for securely fixing down diamond drilling rig stands.

M12 20 x 85mm Shield anchor. Used in conjunction with the M12 fast bolt. A 20mm per-drilled hole is required for this anchor.