Dry Diamond cores and accessories: Accessories

Chuck adaptor pack. Comprises: Chuck adaptor, guide rod & drift

Chuck Extension Bar 250mm long

Chuck Adaptor

SDS Adaptor pack. Comprises: SDS adaptor, guide rod & drift

SDS Extension Bar 250mm long

SDS Adaptor pack

A taper guide rod

Drift key

Extension 1/2" (female) to 1/2" (male) 250mm long

13 x 400mm Chuck masonry bit

13 x 460mm SDS Masonry bit

10 x 200mm A taper pilot drill bit

Hilti adaptor DD100 fitting to 1/2" (male)

Adaptor 1/2" (male) to 1/2" (male)

Small dust suction plate for dry core diameters 28mm to 92mm. Simple, yet highly effective low cost solution providing 100% dust free efficiency drilling when used in conjunction with our PV25 dust extractor or any other good extraction unit. Because the dust is drawn at source this product is far more effective than the more costly dust swivel accessories that fit to the machine chuck. In addition, because the dust is drawn at source it is acceptable to use either slotted or unslotted dry cores.

Large dust suction plate for dry core diameters 102mm to 162mm. Simple, yet highly effective low cost solution providing 100% dust free efficiency drilling when used in conjunction with our PV25 dust extractor or any other good extraction unit. Because the dust is drawn at source this product is far more effective than the more costly dust swivel accessories that fit to the machine chuck. In addition, because the dust is drawn at source it is acceptable to use either slotted or unslotted dry cores.